Valorization of waste Ti6Al4V chips for epoxy composite production: A circular economy approach

Basit Öğe Kaydı
dc.authoridMocan, Merve/0000-0001-6192-0941
dc.contributor.authorTeke, Erdogan
dc.contributor.authorAlyamac-Seydibeyoglu, Elif
dc.contributor.authorMocan, Merve
dc.contributor.authorSeydibeyoglu, M. Ozgur
dc.date.accessioned2024-08-31T07:49:40Z
dc.date.available2024-08-31T07:49:40Z
dc.date.issued2024
dc.departmentEge Üniversitesien_US
dc.description.abstractWith increasing awareness of the circular economy, utilizing waste materials from titanium alloys for polymer composites offers numerous advantages. In this study, medical-grade titanium alloy, Ti6Al4V chips were finely ground and mixed with epoxy resin to produce particulate-reinforced composites. The tensile strength showed a 32% improvement compared to the neat epoxy. Similar results were observed for the flexural test, showing a 36% improvement in the composites. Moreover, a substantial 96% increase in thermal conductivity was observed, significantly expanding the potential application areas for the epoxy-based composites. These improvements were achieved without the use of superfine nanoparticles or other expensive additives. This underscores the potential of a circular approach in the materials world, offering many new opportunities while promoting sustainability.en_US
dc.identifier.doi10.1002/pc.28787
dc.identifier.issn0272-8397
dc.identifier.issn1548-0569
dc.identifier.scopus2-s2.0-85198512411en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.urihttps://doi.org/10.1002/pc.28787
dc.identifier.urihttps://hdl.handle.net/11454/104944
dc.identifier.wosWOS:001266779900001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherWileyen_US
dc.relation.ispartofPolymer Compositesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmz20240831_Uen_US
dc.subjectMechanical Propertiesen_US
dc.subjectMetal-Polymer Compositesen_US
dc.subjectThermal Conductivityen_US
dc.subjectTitanium Alloyen_US
dc.subjectWasteen_US
dc.titleValorization of waste Ti6Al4V chips for epoxy composite production: A circular economy approachen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu