An investigation of WEDM process parameters on the surface roughness of Al/B4Cp metal matrix composites

Basit Öğe Kaydı
dc.contributor.authorOzan S.
dc.contributor.authorGuleryuz L.F.
dc.contributor.authorKasman Ş.
dc.contributor.authorIpek R.
dc.date.accessioned2019-10-27T08:24:30Z
dc.date.available2019-10-27T08:24:30Z
dc.date.issued2012
dc.departmentEge Üniversitesien_US
dc.descriptionGebze Institute of Technology;Izmir Katip Celebi University;Istanbul Kultur University;Doga Nanobiotech Inc.;Terra Lab. Inc.en_US
dc.description2nd International Advances in Applied Physics and Materials Science Congress, APMAS 2012 -- 26 April 2012 through 29 April 2012 -- Antalya --en_US
dc.description.abstractThe purpose of this study is to define the effects of wire electrical discharge machining (WEDM) process parameters on surface roughness for Al/B 4Cp metal matrix composites (MMCs) having different amounts of reinforcement particle (3, 6, and 12 wt.%). Totally nine experiments were performed according to the experimental design method conducted by Taguchi L9 orthogonal array on Al/B4Cp MMC samples to determine the effect of WEDM process parameters on the surface roughness. The particle reinforcement amount (wt.%) is the most dominant factor (60.69%) on the surface roughness and it is followed by pulse on time (36.28%) and wire feed (1.49%), respectively. The surface roughness value taken from confirmation experiments and predicted value is 5.26µm, 5.37µm respectively. © 2012 American Institute of Physics.en_US
dc.identifier.doi10.1063/1.4751619
dc.identifier.endpage320en_US
dc.identifier.isbn9780735410855
dc.identifier.issn0094243X
dc.identifier.issn0094-243Xen_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage317en_US
dc.identifier.urihttps://doi.org/10.1063/1.4751619
dc.identifier.urihttps://hdl.handle.net/11454/26587
dc.identifier.volume1476en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofAIP Conference Proceedingsen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMetal matrix compositesen_US
dc.subjectpowder metallurgyen_US
dc.subjectwire electrical discharge machiningen_US
dc.titleAn investigation of WEDM process parameters on the surface roughness of Al/B4Cp metal matrix compositesen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu