Power Requirement and Fuel Consumption Reduction of Forage Harvester Chopper Blades by Thermal Coating

Basit Öğe Kaydı
dc.authoridErgül, Engin/0000-0003-3347-5400
dc.authorwosidErgül, Engin/AAE-5384-2021
dc.contributor.authorErgul, Engin
dc.contributor.authorCakmak, Bulent
dc.date.accessioned2023-01-12T20:19:21Z
dc.date.available2023-01-12T20:19:21Z
dc.date.issued2021
dc.departmentN/A/Departmenten_US
dc.description.abstractThe objective of this study wasto scrutinize the improvement of cutting efficiency of chopper blades used in forage harvesters and to determine the change in energy consumption by this means. The chopper blades used conventionally were coated thermally with two type coating powder alloys in the study. The coated blades and conventional ones were used on the same machine during all harvest season. Power requirement and fuel consumption of the harvest machine during harvesting were determined separately by using conventional and coated blades. It was determined that the blades coated with WC-Ni- Cr-Co-B-Si powder alloy (WC+Co) generated high rate of energy saving in comparison to both conventional blades and other coated blades. It was determined that conventional blades have higher fuel consumption than the coated blades. The fuel consumption of WC+Co powder alloy coated blades was approximately 22.5% lower than that of conventional blade. This difference increased as the harvested area increased. The fuel consumption difference between conventional blade and WC+Co powder alloy coated blades reached 3.89 Lh(-1) (40.65%) when the harvested area reached 3 ha.en_US
dc.identifier.endpage90en_US
dc.identifier.issn0084-5841
dc.identifier.issn0084-5841en_US
dc.identifier.issue1en_US
dc.identifier.startpage81en_US
dc.identifier.urihttps://hdl.handle.net/11454/79101
dc.identifier.volume52en_US
dc.identifier.wosWOS:000755822100014en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherFarm Machinery Industrial Research Corpen_US
dc.relation.ispartofAma-Agricultural Mechanization In Asia Africa And Latin Americaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFuel costen_US
dc.subjectHVOFen_US
dc.subjectPowder alloyen_US
dc.subjectpower requirementen_US
dc.subjectEnergy Useen_US
dc.subjectWear-Resistanceen_US
dc.subjectCorn-Silageen_US
dc.subjectMaizeen_US
dc.subjectMechanismsen_US
dc.subjectEfficiencyen_US
dc.subjectEmissionsen_US
dc.subjectBehavioren_US
dc.titlePower Requirement and Fuel Consumption Reduction of Forage Harvester Chopper Blades by Thermal Coatingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu