Mechanical performance of hybrid carbon/fiberglass composite laminates reinforced with nanoclay

Basit Öğe Kaydı
dc.contributor.authorOner G.
dc.contributor.authorUnal H.Y.
dc.contributor.authorPekbey Y.
dc.date.accessioned2019-10-26T21:14:57Z
dc.date.available2019-10-26T21:14:57Z
dc.date.issued2018
dc.departmentEge Üniversitesien_US
dc.description.abstractThe objective of this study was to produce the hybrid carbon/fiberglass composite laminates, to characterize their mechanical properties under room temperature and to evaluate the effect of nanoclay addition into epoxy matrix on the mechanical properties of the hybrid composites. During fabrication of fiber reinforced polymer composites, the organo modified nanoclay (0%, 0.5%, 0.75%, and 1.25% of nanoclay reinforcement by weight) was mixed with epoxy system using an ultrasonic mixer. The produced matrix was then applied onto fibers by using hand layup method. Mechanical tests were performed to investigate the effect of nanoclay content on tensile and flexural properties of the fabricated hybrid carbon/fiberglass composites. The tensile and three point bending tests were performed according to ASTM D3039 and ASTM D7264, respectively, to measure the highest tensile strength, modulus of elasticity and bending modulus of the hybrid laminates. Experimental results show that the tensile and flexural performance of hybrid carbon/fiberglass composites was changed with the nanoclay content. © 2018 Polish Academy of Sciences Institute of Physics. All rights reserved.en_US
dc.description.sponsorshipBritish Association for Psychopharmacologyen_US
dc.description.sponsorshipThis research has been supported by the Scientific Research Project of Atatürk University of Turkey (BAP). Project number: BAP 2016/139. --en_US
dc.identifier.doi10.12693/APhysPolA.134.164
dc.identifier.endpage167en_US
dc.identifier.issn0587-4246
dc.identifier.issn0587-4246en_US
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage164en_US
dc.identifier.urihttps://doi.org/10.12693/APhysPolA.134.164
dc.identifier.urihttps://hdl.handle.net/11454/15924
dc.identifier.volume134en_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherPolish Academy of Sciencesen_US
dc.relation.ispartofActa Physica Polonica Aen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.titleMechanical performance of hybrid carbon/fiberglass composite laminates reinforced with nanoclayen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu