Yazar "Yagmurcukardes, Nesli" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
  • Küçük Resim Yok
    Öğe
    Electrical properties of SAM-modified ITO surface using aromatic small molecules with double bond carboxylic acid groups for OLED applications
    (Elsevier Science Bv, 2014) Can, Mustafa; Havare, Ali Kemal; Aydin, Hasan; Yagmurcukardes, Nesli; Demic, Serafettin; Icli, Siddik; Okur, Salih
    5-[(3-Methylphenyl)(phenyl)amino]isophthalic acid (5-MePIFA) and 5-(diphenyl)amino]Isophthalic acid (5-DPIFA) organic molecules were synthesized to form self-assembled monolayer on indium tin oxide (ITO) anode to enhance hole transport from ITO to organic hole transport layers such as TPD. The modified surface was characterized by scanning tunneling microscopy (STM). The change in the surface potential was measured by Kelvin probe force microscopy (KPFM). Our Kelvin probe force microscopy (KPFM) measurements showed that the surface potentials increased more than 100 mV with reference to bare indium tin-oxide. The results show that the threshold voltage on OLEDs with modified ITO is lowered significantly compared to OLEDs with unmodified ITO. The hole mobility of TPD has been estimated using space-charge-limited current measurements (SCLC). (C) 2014 Elsevier B.V. All rights reserved.
  • Küçük Resim Yok
    Öğe
    Modification of ITO surface using aromatic small molecules with carboxylic acid groups for OLED applications
    (Elsevier Science Sa, 2011) Havare, Ali Kemal; Can, Mustafa; Demic, Serafettin; Okur, Salih; Kus, Mahmut; Aydin, Hasan; Yagmurcukardes, Nesli; Tari, Suleyman
    4-[(3-Methylphenyl)(phenyl)amino]benzoic acid (MPPBA) was synthesized in order to facilitate the hole-injection in Organic Light Emitting Diodes (OLED). MPPBA was applied to form self-assembled monolayer (SAM) on indium tin oxide (ITO) anode to align energy-level at the interface between organic semiconductor material (TPD) and inorganic anode (ITO) in OLED devices. The modified surface was characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). KPFM was used to measure the surface potential and work function between the tip and the ITO surface modified by SAM technique using MPPBA. The OLED devices (ITO/MPPBA/TPD/Alq(3)/Al) fabricated with SAM-modified ITO substrates showed lower turn-on voltages and enhanced diode current compare to the OLED devices fabricated with bare ITO substrates. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.