Yazar "Ertugrul, Fahinur" seçeneğine göre listele
Listeleniyor 1 - 9 / 9
Sayfa Başına Sonuç
Sıralama seçenekleri
Öğe Bond Strength of Different Dentin Bonding Systems to Fluorotic Enamel(Quintessence Publishing Co Inc, 2009) Ertugrul, Fahinur; Turkun, Murat; Turkun, L. Sebnem; Toman, Muhittin; Cal, EbruPurpose: The effect of three different bonding strategies on the shear bond strength of a resin composite to fluorotic enamel surfaces was investigated. Materials and Methods: Thirty-six noncarious extracted human molars with fluorosis and 36 without fluorosis were scraped clean from any remaining tissue, and then were divided into three subgroups according to the tested dentin bonding systems. The resin composite was bonded to the teeth using three different adhesive systems: Peak LC Bond with an etch-and-rinse technique (Ultradent Products), Peak LC Bond with a self-etching technique using Peak SE Primer (Ultradent Products), and Xeno V (Dentsply Caulk) using a one-bottle self-etching technique. Following the photopolymerization of the resin composites, thermocycling was performed 5000 times. Shear bond strengths were tested using the Shimadzu Universal Testing Machine until failure. The analysis of the fractured enamel surfaces was performed using an optical microscope (Nikon ECLIPSE ME 600) at 1OX and 1000X magnification, and the images were analyzed with an image analyzer (LUCIA 4.21). The data obtained were analyzed with two-way ANOVA and the Bonferroni test at a significance level of p < 0.05. Results: Mean shear bond strengths in MPa of the groups were: Peak LC Bond, self-etching, on fluorotic enamel 13.23 +/- 2.58 and on nonfluorotic enamel 17.81 +/- 2.90; Peak LC Bond, etch-and-rinse, on fluorotic enamel 16.77 +/- 2.32 and on nonfluorotic enamel 21.13 +/- 2.74; one-bottle self-etching Xeno V on fluorotic enamel 10.79 +/- 2.14 and on nonfluorotic enamel 14.58 +/- 2.99. Conclusion: Fluorosis adversely affected the bonding performance of all the bonding systems to enamel. The use of the etch-and-rinse dentin bonding technique produced higher bond strengths of the resin composite tested to fluorotic and nonfluorotic enamel compared to both self-etching techniques.Öğe Bond Strength of Different Dentin Bonding Systems to Fluorotic Enamel(Quintessence Publishing Co Inc, 2009) Ertugrul, Fahinur; Turkun, Murat; Turkun, L. Sebnem; Toman, Muhittin; Cal, EbruPurpose: The effect of three different bonding strategies on the shear bond strength of a resin composite to fluorotic enamel surfaces was investigated. Materials and Methods: Thirty-six noncarious extracted human molars with fluorosis and 36 without fluorosis were scraped clean from any remaining tissue, and then were divided into three subgroups according to the tested dentin bonding systems. The resin composite was bonded to the teeth using three different adhesive systems: Peak LC Bond with an etch-and-rinse technique (Ultradent Products), Peak LC Bond with a self-etching technique using Peak SE Primer (Ultradent Products), and Xeno V (Dentsply Caulk) using a one-bottle self-etching technique. Following the photopolymerization of the resin composites, thermocycling was performed 5000 times. Shear bond strengths were tested using the Shimadzu Universal Testing Machine until failure. The analysis of the fractured enamel surfaces was performed using an optical microscope (Nikon ECLIPSE ME 600) at 1OX and 1000X magnification, and the images were analyzed with an image analyzer (LUCIA 4.21). The data obtained were analyzed with two-way ANOVA and the Bonferroni test at a significance level of p < 0.05. Results: Mean shear bond strengths in MPa of the groups were: Peak LC Bond, self-etching, on fluorotic enamel 13.23 +/- 2.58 and on nonfluorotic enamel 17.81 +/- 2.90; Peak LC Bond, etch-and-rinse, on fluorotic enamel 16.77 +/- 2.32 and on nonfluorotic enamel 21.13 +/- 2.74; one-bottle self-etching Xeno V on fluorotic enamel 10.79 +/- 2.14 and on nonfluorotic enamel 14.58 +/- 2.99. Conclusion: Fluorosis adversely affected the bonding performance of all the bonding systems to enamel. The use of the etch-and-rinse dentin bonding technique produced higher bond strengths of the resin composite tested to fluorotic and nonfluorotic enamel compared to both self-etching techniques.Öğe Bond strength of glass-ceramics on the fluorosed enamel surfaces(Elsevier Sci Ltd, 2008) Toman, Muhittin; Cal, Ebru; Turkun, Murat; Ertugrul, FahinurObjectives: Effect of different adhesive luting systems on the shear bond strength of IPS Empress 2 ceramic restorations to fluorosed enamel surface was investigated. Methods: Forty-eight ceramic discs (2 mm x 3 mm; IPS Empress 2) were fabricated. Twenty-four non-carious extracted human molar teeth with fluorosis and 24 without fluorosis were cleaned with pumice using a plastic brush and then they were divided into two main groups. The IPS Empress 2 ceramic discs were luted to the teeth of four subgroups with two different adhesive luting systems, Variolink 2/Excite DSC (etch-and-rinse)and Clearfil Esthetic Cement/ED Primer II (self-etch), thermocycling was performed 5000 times. Shear bond strengths were tested using Shimadzu Universal Testing Machine until failure. An optical microscope and image analyzer were used at 10x and 1000x magnification to analyze the surfaces for adhesive, cohesive and mixed failure percentages. Data was analyzed with one-way ANOVA and Tukey test at a significance level of p < 0.05. Results: Mean shear bond strength data of the groups in MPa were; Variolink 2/Excite DSC on fluorosed enamel: 18.3 +/- 3.08, Variolink 2/Excite DSC on non-fluorosed enamel: 18.79 +/- 2.65, Clearfil Esthetic Cement/ED Primer II on fluorosed enamel: 8.43 +/- 2.45, Clearfil Esthetic Cement/ED Primer II on non-fluorosed enamel: 13.53 +/- 1.68. Mixed failure was the most prevalent type of failure in moderate fluorosed and non-fluorosed teeth with etch-and-rinse dentin bonding system, and in fluorosed teeth with self-etch dentin bonding system. Conclusions: The use of an etch-and-rinse adhesive luting procedure produced higher bond strengths of glass-ceramics bonded to fluorosed and non-fluorosed enamel surfaces than the self-etch bonding system. (C) 2008 Elsevier Ltd. All rights reserved.Öğe Caries-Preventive Effect and Retention of Glass-Ionomer and Resin-Based Sealants: A Randomized Clinical Comparative Evaluation(Hindawi Ltd, 2022) Uzel, Ilhan; Gurlek, Ceren; Kuter, Berna; Ertugrul, Fahinur; Eden, EceBackground. Deep fissures are highly unprotected from the development of caries. Resin-based materials and glass-ionomer cements for sealing fissures are useful in caries control through physical barrier formation, which prohibits metabolic exchange between fissure microorganisms. Retention is one of the most critical properties of fissure sealants. This in vivo study is aimed at comparing and evaluating the clinical efficacy of resin and glass ionomer-based fissure sealants on first permanent molars with follow-ups at 6-, 12-, and 18-month intervals. Methods. A randomized split-mouth design clinical study was conducted after obtaining the ethical committee approval. A total of 50 patients, aged between 7 and 12 years, were randomized and enrolled in the study to perform a total of 200 sealant placements on all four caries-free and hypoplasia-free first permanent molars having deep fissures, which are susceptible to caries, were included in this study. The four permanent molars were divided into the following four groups: group A (control), B (Grandioseal, Voco, Germany), C (Smartseal & Loc, Detax Gmbh & Co, Germany), and D (Fuji triage capsule, GC, Belgium). The sealed molars were clinically evaluated at intervals of 6, 12, and 18 months to assess sealant retention, surface roughness, marginal coloration, and caries status through visual evaluation of the sealant by two evaluators. Results. Concerning retention, there were statistically significant differences between the sealants in terms of the survival of partial and fully retained sealants as well as in the survival of caries-free teeth. Two resin-based (Smartseal & Loc) and glass-ionomer cement (Fuji triage) sealants showed significantly similar performances in permanent molars for up to 18 months. In terms of retention, one of the resin-based (Grandioseal) sealants performed better as compared to the others and showed better caries prevention in deep fissures. Conclusion. It is concluded that both the sealants had comparable retention and caries-preventive effects in 7 to 12-year-old children and can be considered as suitable sealants for a period of at least 18 months in moderate caries risk patients.Öğe Effect of Orthodontic Appliances on Oral Microbiota-6 Month Follow-up(Journal Pedodontics Inc, 2011) Topaloglu-Ak, Asli; Ertugrul, Fahinur; Eden, Ece; Ates, Mustafa; Bulut, HakanObjective: This study investigates the effect of fixed and removable orthodontic appliances among children on salivary Streptococcus mutans, Lactobacillus sp. and Candida albicans. Study Design: The study was conducted on 69 patients aged between 6-17 years who used fixed or removable orthodontic appliances. Five ml samples of unstimulated saliva from each patient were collected at baseline and at the I, 3 and 6 month periodic controls. Samples were diluted and plated on Mitis Salivarus Agar (MSA), Man Rogosa Sharp Agar (MRS) and Saboroud Dextrose Agar (SDA). The growths on the plates were examined under a stereomicroscope. Numbers of colony forming units (CFU) per plate were counted. For statistical analysis, the paired t test and Chi-Square were used. Results: S mutans and Lactobacillus sp counts increased significantly 6 months after the insertion of fixed/removable orthodontic appliances in the oral cavity. A significant increase for C albicans presence was noted after 3 months compared with baseline for fixed appliances. Conclusion: Long-term utilization of orthodontic appliances may have a negative effect on microbial flora and increase the risk of new carious lesions and periodontal problems. Patients should be recalled within short time intervals to be motivated for oral hygiene during their orthodontic therapy.Öğe Evaluation of Glass-Ionomer versus Bulk-Fill Resin Composite: A Two-Year Randomized Clinical Study(Mdpi, 2022) Uzel, Ilhan; Aykut-Yetkiner, Arzu; Ersin, Nazan; Ertugrul, Fahinur; Atila, Elif; Ozcan, MutluBackground: The aim of this split-mouth design research was to compare the clinical performance of a glass-ionomer cement system on Class I/II cavities against the clinical performance of bulk-fill resin composite restoration materials. Methods: Thirty-five patients were randomized and enrolled in the study, aged between 10 and 12 years, all of whom had a matched pair of permanent mandibular carious molars with similar Class I/II. A total of 70 restoration placements were performed. The patients were each given two restorations consisting of either a glass-ionomer cement with a nano-filled coating or a bulk-fill resin composite after the use of a self-etch adhesive. The cumulative survival rates were estimated using log-rank test and the Kaplan-Meier method. For comparison of the restorative materials in line with the modified Ryge, the McNemar test and the Wilcoxon signed rank test were employed. Results: With regard to retention, the glass-ionomer cement system and bulk-fill resin composite performed similarly in permanent molars in Class I/II cavities over a period of up to 24-months (p > 0.05). Over the 24-month period, Class I restorations showed statistically better survival rates than Class II restorations (p < 0.05). In the case of glass-ionomer cement systems, over the two-year period, more common chipping and surface degradations were observed. Conclusions: The glass-ionomer cement system and bulk-fill resin composite restorative materials display good clinical performance over a period of 24-months.Öğe Long-term Dental Anomalies after Pediatric Cancer Treatment in Children(Galenos Yayincilik, 2019) Kilinc, Gulser; Bulut, Gulcin; Ertugrul, Fahinur; Oren, Hale; Demirag, Bengu; Demiral, Ayse; Aksoylar, Serap; Kernel, Emine Serra; Ellidokuz, Hulya; Olgun, NurObjective: The aim of this study is to determine the frequency of dental anomalies (DAs) (microdontia, hypodontia, hyperdontia, enamel defect, root malformation) in pediatric cancer patients at the ages <5 years and between 5 and 7 years, and understand their relationship with the received therapy. Materials and Methods: Pediatric patients who were diagnosed with cancer and treated before the age of 7 years were investigated in a case-control design. The study included 93 pediatric patients whose ages at diagnosis were between 9 months and 7 years and whose treatments were completed before 5-8 years. Group A consisted of patients in the age range of 9 months to 4 years and Group B consisted of patients in the age range of 5-7 years. Seventy-two siblings with compatible dental age ranges were included in the control group. For both groups, intraoral examinations were performed and panoramic radiographs were taken. Results: Among the 93 pediatric patients, the mean age was 9.54 +/- 1.25 (range: 8-13 years) and 48 (51.6%) patients were male. The most common diagnosis was hematologic malignancy with a rate of 65.5%. At least one DA was detected in 7 (9.7%) individuals of the control group and in 78 (83.9%) of the patient group. While the patients in the study group had all kinds of DAs, those in the control group had only enamel defects. The rates of microdontia (p=0.077) and hypodontia (p=0.058) were detected to be significantly higher in Group A than in Group B. Root malformation was more common in patients receiving chemotherapy and radiotherapy than in those receiving only chemotherapy (p=0.006). Conclusion: In this study it was found that the pediatric patients who received cancer treatment before the age of 7 years constituted a high-risk group for DAs. The frequencies of microdontia and hypodontia were increased even more when the patient was treated for cancer before 5 years of age.Öğe Multidiciplinary treatment of complicated subgingivally fractured permanent central incisors: two case reports(Blackwell Publishing, 2008) Ertugrul, Fahinur; Eden, Ece; Ilgenli, TuncSubgingival crown fractures with pulp exposure in permanent teeth present both endodontic and restorative problems with unfavorable prognosis. Numerous restorative techniques such as resin composite restorations with and without pins, crowns and reattachment of the fractured dental fragment could be listed as the treatment options. There are several successful cases in the literature where advantages of less microleakage and proper gingival biocompatibility in cases with reattachment of the tooth fragment were reported. Two cases of palatinal subgingival crown fractures are reported. Both had been restored by reattachment of the fragment and composite with the help of the flap surgery. Follow up visits (Case 1 for 4 years and Case 2 for 1 year) revealed satisfactory esthetics and function.Öğe Plaque Accumulation and Inflammation Adjacent to Restorations of Amorphous Calcium Phosphate-containin Composite in Early Childhood Caries(Quintessence Publishing Co Inc, 2018) Gurlek, Ceren; Ertugrul, Fahinur; Nile, Christopher; Lappin, David F.; Buduneli, NurcanPurpose: To evaluate the clinical, biochemical, and microbiological reactions to nanocomposite containing amorphous calcium phosphate (ACP) in comparison to a traditional composite restorative material in early childhood caries. Materials and Methods: Eighteen teeth were restored with the test material (ACP-containing resin) and 18 teeth were restored with the control material (traditional composite, TC) in fourteen paediatric patients using a splitmouth design. One caries- and restoration-free intact tooth in each patient was selected as the healthy control. Gingival crevicular fluid (GCF) and supragingival plaque samples were collected at baseline before the treatment and also on days 1, 7, 14 and 30 after treatment. Unstimulated whole saliva samples were obtained from each patient at baseline, and 1 and 6 months after restoration. GCF and saliva samples were assayed for IL-17A, IL-17F IL-17A/F, IL-17E, OPG and RANKL levels by ELISA, and plaque composition was assessed using RT-PCR. Results: Clinical evaluation indicated no statistically significant differences between the two restorative materials according to the FDI criteria surface lustre, material retention and marginal adaptation properties. Pro-inflammatory IL-17 levels decreased statistically significantly at 6 months compared to baseline and 1-month values (p < 0.05). The baseline pro-inflammatory IL-17 cytokine levels in GCF samples around the carious teeth were higher than those obtained around the healthy teeth (p < 0.05), but similar in GCF from the ACP-test and TC teeth. Microbiological findings were similar in the ACP and T groups. Conclusion: It may be suggested that both ACP-containing and traditional resin composites show similar antimicrobial and biochemical effects in early childhood caries.
