Ileri E.Kocar G.2019-10-272019-10-2720090887-06240887-0624https://doi.org/10.1021/ef9004434https://hdl.handle.net/11454/27227This paper presents the effect of fuel injection advance on engine performance and exhaust emission parameters using a diesel engine running on canola oil methyl ester (COME). COME was produced and tested at full load with various engine speeds by changing fuel injection advance in a turbocharged directinjection (TDI) diesel engine with four cycles and four cylinders. According to engine performance test results, maximum brake torque (228.2 Nm), brake power (80.3 kW), and thermal efficiency (39.77%) and minimum brake-specific fuel consumption (226.24 g kW-1 h-1) have been obtained for COME on early fuel injection advance (18° crank angle). In addition, early fuel injection advance for O2 and CO but late fuel injection advance (12° crank angle) for NOx and CO2 must be preferred for decreasing exhaust emissions. Exhaust gas temperatures and smoke density increased by an average of 0.33 and 2.69%, respectively, for early fuel injection advance, and these are increased by an average of 1.48 and 13.66%, respectively, for late fuel injection advance. Copyright © 2009 American Chemical Society.en10.1021/ef9004434info:eu-repo/semantics/closedAccessArticle231051915198Q1