Characterization of Ti + N and Zr ion implanted 316 L stainless steel
Küçük Resim Yok
Tarih
2007
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, polished 316LSS stainless steel has been implanted with Ti + N and Zr ions at fluence of 2 × 1017 ions/cm2 and 1 × 1017 ions/cm2, respectively. Ion charge state distributions of Ti + N and Zr were measured by time-of-flight spectrometry, and the mean energies of these ions were determined. The Zr concentration profiles were obtained by Rutherford backscattering spectrometry. The range distribution of ions in implanted and unimplanted samples were evaluated using TRIM and STOPPO programs and the results were compared with the experimental data, which were in good agreement. The influence of the ions on the mechanical behavior of the 316LSS was investigated. The measurements show that after Ti + N implantation; the friction coefficient decreases, the hardness value increases, the wear resistance decreases and after Zr implantation; the friction coefficient decreases, the hardness value increases and the wear resistance increases with respect to an unimplanted sample. © 2007 Elsevier B.V. All rights reserved.
Açıklama
Anahtar Kelimeler
Ion implantation, Surface treatments, Wear
Kaynak
Surface and Coatings Technology
WoS Q Değeri
Scopus Q Değeri
Q1
Cilt
201
Sayı
19-20 SPEC. ISS.
