Atık Kuru Pillerdeki Grafitin Seramik Plastik Çamuruna Katkısı
Küçük Resim Yok
Tarih
2009
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Bu çalışmada piyasadan toplanan atık kuru pillerdeki grafitin, seramik plastik çamurunda kullanılabilirliği araştırılmıştır. Bu amaçla kuru pilin içindeki grafit çıkarılmıştır. Elde edilen grafit az miktarda su ile karıştırılmış ve plastik çamura katılarak homojen bir şekilde yoğrulmuştur. Hazırlanan plastik çamurdan şekillendirilen parçalar, oda sıcaklığında kurutulmuş ve 900 oC'de pişirilmiştir. Elde edilen bisküvilerin kuru ve pişme küçülmesi, mukavemet ve su emme testleri yapılmıştır.
In this study, graphite which was found in the battery waste was investigated as an addition of ceramic soft plastic body. In this purpose, graphite was taken out from battery waste. This graphite was added to ceramic raw materials and kneaded with some water. Plastic prepared parts were shaped by hand and shaped parts were dried in the ambient temperature. Dried bodies were fired at 900 oC temperature. Drying and fired shrinkage, water absorption and fired strength of these bodies were studied.
In this study, graphite which was found in the battery waste was investigated as an addition of ceramic soft plastic body. In this purpose, graphite was taken out from battery waste. This graphite was added to ceramic raw materials and kneaded with some water. Plastic prepared parts were shaped by hand and shaped parts were dried in the ambient temperature. Dried bodies were fired at 900 oC temperature. Drying and fired shrinkage, water absorption and fired strength of these bodies were studied.
Açıklama
Anahtar Kelimeler
Mühendislik, Ortak Disiplinler
Kaynak
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
WoS Q Değeri
Scopus Q Değeri
Cilt
15
Sayı
3
